It varies according to the surface to be used. The main lines of use are as described below. For more detailed information, you can get technical support from the whatsapp button or our other communication channels.
General application form; It is applied to the surface, waited between 10 seconds and 3 minutes, rubbed with a brush or similar mechanical effect, rinsed with a wet absorbent cloth or water. If no results are obtained, the cooldown is increased. While waiting, care should be taken that the product does not dry on the surface and that it is constantly wet.
For very heavy dirt and oils, you can directly apply the product pure. It can be diluted up to 150 times depending on the density of the dirt or the surface to be applied.
Example :
For Floor Cleaning Machines : Heavy soiling 1 part product + 10 parts water / light soiling 1 part product + 100 parts water / daily cleaning 1 part product + 150 parts water
Leather Fabric etc.: It can be applied by diluting 1 layer or diluting 20 times depending on the density of the dirt
Automobile or work machinery : You can use it directly or by diluting 1 layer on exterior surfaces, and by diluting at least 1 layer and maximum 20 times on interior surfaces.
You can increase the effectiveness of the product by mixing it with HOT WATER. At 60 degrees and above, the efficiency increases up to 10 times.
