It varies according to the surface to be used. The outline of its use is as follows. For more detailed information, you can get technical support from whatsapp button or other communication channels.
General method of application; It is applied to the surface, waited between 10 seconds and 3 minutes, rubbed with a brush or similar mechanical effect, rinsed with a wet absorbent cloth or water. If the result is not obtained, the waiting time is increased. While waiting, care is taken to ensure that the product does not dry on the surface, it is constantly wet.
For very heavy dirt and oils, you can apply the product directly in its pure form. Depending on the density of the dirt or the surface to be applied, it can be diluted up to 150 times.
Example:
For Floor Cleaning Machines: Heavy dirt 1 brim product + 10 brim water / light dirt 1 brim product + 100 brim water / daily cleaning 1 brim product + 150 brim water
Leather Fabric etc.: can be applied by diluting 1 layer or diluting 20 times according to the density of dirt.
Automobile or Construction Machinery: You can use it directly on external surfaces or by diluting in 1 layer, and on internal surfaces by diluting at least 1 layer and at most 20 layers.
You can increase the effectiveness of the product by mixing it with HOT WATER. At 60 degrees and above, the efficiency increases up to 10 times.
