It varies according to the surface to be used. The outline of its use is as follows. For more detailed information, you can get technical support from whatsapp button or other communication channels.
General method of application; It is applied to the surface, waited between 10 seconds and 3 minutes, rubbed with a brush or similar mechanical effect, rinsed with a wet absorbent cloth or pressurized water. If the result is not obtained, the waiting time is increased. While waiting, care is taken to ensure that the product does not dry on the surface, it is constantly wet.
For very heavy dirt and oils, you can apply the product directly in its pure form. It can be diluted up to 5 times, depending on the density of dirt or the surface to be applied.
RECOMMENDATION : For surfaces that you want to remain wet for a vertical or long time, spray products on paper towels, stick them to the surface and wet them by spraying products on the towel from time to time. In case of problems such as contamination caused by buffer rubbing, etc., leaving it wet for up to 10 minutes will facilitate the solution.
You can increase the effectiveness of the product by mixing it with HOT WATER. At 60 degrees and above, the effectiveness increases up to 10 times.
