Our parts washing machine shampoos are a cleaning product specially formulated for cleaning parts used in the industrial or automotive sector. Our shampoo is designed to effectively dissolve and remove oil, dirt, rust and other debris.
In general, the use of the product is as follows; Clean the parts washing machine and drain the water inside. Make sure the machine is clean and ready for use.
Pour the product into the reservoir according to the water tank of the parts washing machine. Usually a measuring cup or dosing pump is used.
Avoid overdosing when dosing the shampoo correctly. Place the parts that need to be cleaned into the chamber of the machine. Close the machine cover and start the cleaning program.
The machine will enable the shampoo to work effectively on the parts. The cleaning time should be between 15 minutes and 45 minutes between 60 and 80 degrees.
After the cleaning process is complete, remove the parts from the machine. Remove the remnants of the shampoo by rinsing the parts with water. To do this, you can use clean water or perform another rinse.
If the procedure is sufficient, repeat the washing by extending the washing time.
